Norcon's TTU-1 is the most popular 2-way transaction intercom in the world for hands-free
communication between your employee and your customer. Complete for continuous-duty
operation. Permits hands-free,
2-way communication between the booth attendant and the customer. Vox circuitry
facilitates ongoing, clear, 2-way conversation at all times - as if the two parties
were together in the same room.
Today's security and isolation booths are often the best step you can take
to protect your employees. But do they protect or help maintain your very important
good will? Not if clerks and customers have to shout and growl and repeat themselves
to be heard or understood.
Norcon's patent pending TTU-1 Talk-Thru Communicator is a 2-way, hands-free audio
system that provides high-quality personal communication between people separated by
security or isolation barriers. It is the most widely used system of its type in the U.S.,
and the world.
Shipping Info:
(1) Box - 7" x 7" x 12"
HOW IT WORKS...
Norcon's TTU-1 Talk-Thru Communicator provides hands-free communication between
people separated by security or isolation barriers. It is the most widely used
barier intercom system of its type in the world. The TTU-1 provides clear communication even in environments with high ambient
noise through the use of compression circuitry which helps to reduce loud, annoying
sounds. Unwanted background noise is minimized through the use of automatic volume
attenuation circuitry. If the gooseneck microphone is not used for 30 seconds,
the outside channel volume will be reduced approximately 70%. Normal operation
is restored as soon as the attendant speaks into the gooseneck microphone.
HOW TO INSTALL...
Installation of the TTU-1 is a very simple, one-person operation. All that's needed is
a 3- to 4-in. cutout in the barrier. Four fasteners and two rubber gaskets for mounting
are supplied. Specify barrier thickness when ordering. The front face and housing are easily mounted on opposite sides of the barrier using
the fasteners. The rubber gaskets prevent slippage and protect the barrier surface. The
electronic section is then inserted into the housing and fastened in place.
FEATURES
- Clear, 2-way hands-free voice communication.
- Avoids shouting, repetition, misunderstanding.
- Rugged, tamper-resistant materials.
- Quality electronic design and engineering.
- Simple, one-person installation.
- Self-powered with rechargeable battery option.
- Fast plug-in recharge. Bullet-resistant option.*
- Export models available.
- Units available for ADA applications.
- Made in U.S.A.
SPECIFICATIONS
MECHANICAL
- Outside face plate: Solid aluminum, anodized finish, tamper-resistant
- Control housing (inside): Machined aluminum, anodized finish, tamper resistant
- Size: Outside face plate 5 in. dia. x 1/2 in. D. Inside control housing 5 in. dia. x 3
1/2 in. D ( for TTU-1D); 2 1/2 in. D (for TTU-1A) Microphone and gooseneck 18 in.
- Weight: lb
- Mounting: Partition hole 3 to 4 in. dia. (3 1/2 in. recommended) Specify barrier
thickness when ordering
- Panel controls: Listen volume, talk volume, on-off switch
ELECTRONIC
- Audio frequency response: Selectively shaped for maximum voice intelligibility
- Audio power: 2 watts per amplifier
- Distortion: Less than 2%
- Listen mode: 20 dB compression
- Talk mode: Vox
- Microphones: Electret
- Power supply/charger: Input: 120 VAC, 60 Hz Output: 12 VDC, 175 mA